Electronic LED Control System Weighing Indicator

Electronic LED Control System Weighing Indicator

Main feature: 
1. Resolution: 24 bits
2. The update rate can be selected: 6.25 times/second, 12.5 times/second, 25 times/second, 50 times/second
3. Two-point (optional) normally open relay output, the output mode can be set: weight sorting mode and fixed value mode
4. Isolated digital communication interface, can choose RS232 and RS485 two ways
5. 20mA current loop output can be connected to Yaohua and Keli large-screen displays
6. Three calibration methods, suitable for calibration in various occasions
7. The analog output type can be set (optional): 4～20mA, 0～20mA, 0～5V or 0～10V
8. 7-digit LED digital tube display, character height 0.56 inches, green display
9. 20-segment light beam indicator, multiple status indicators

Technical Parameters:

1. Load capacity
Excitation voltage: 5.0VDC, which can drive 6 analog sensors of 350Ω.
Analog current output: not more than 500Ω
Analog voltage output: not less than 200 KΩ
Relay contact capacity: AC 2A/250V, DC 5A/120V
2. Performance
Input sensitivity: greater than 1.5uV/d
Non-linearity: better than 0.01%FS
3. Power supply: Power supply voltage range: AC 220V, frequency 50Hz/60Hz, maximum power consumption 6W. The meter needs a good grounding wire, and cannot share a power source with devices that are prone to power noise such as motors, relays, or heaters.
4. Display size (mm) 90×170×103
5. Cabinet opening size (mm): 150.5×75.5
6. Product weight (kg): about 0.96